The All-Terrain AC/DC Regenerative Converter with Silicon Carbide Technology
The GE&EL+ vAC/DC SiC is the most complete and versatile converter in the regenerative energy testing market. The whole Cinergia catalogue in a single unit: A Grid Emulator (GE), an Electronic Load (EL) and a DC Bidirectional (B2C). This converter with SiC Technology is suitable for most test applications in Renewable Energies, Power HiL, Smartgrids, Batteries, and Electrical Vehicles.Order
Bidirectional and Regenerative
Same power in DC and AC
Modbus/Ethernet Open protocol, Labview drivers
The increase of the switching frequency is high enough to significantly improve the current ripple (3 times) and voltage ripple (2.75 times) due to the switching.
Clean grid current
Higher Switching Frequency
Thanks to the SiC MOSFETs in our equipment, the switch is increased up to 60 kHz
A higher bandwidth of the converter translates into a better capacity to control fast-changing and high-frequency signals.
The units integrate a local Emergency. Stop push button and two signals (input + output) to be connected to the laboratory interlock system. Additionally, the digital outputs can be interfaced to safety tower lights.
Allows the local parameterization and command of the device, the configuration of the communications link, plots the main signals and enables the local data logging.
The user interface used by CINERGIA devices has been developed by our R&D team, to offer total control of the device, with a comfortable and intuitive design. This allows us to take full advantage of the capabilities of the device, as well as the programming and execution of standardized or self-created tests..
Remote Control port
~ LAN Ethernet with Modbus/TCP protocol.
~ Labview Drivers
~ RS485 (optional)
Digital IO port
~ 4 digital inputs
~ 3 relay outputs
~ 1 emergency stop
Optional analogue port
~ 6 analogue input 0-10V
~ 6 analogue output 0-10V
Power and Impedance Control
Battery Pack Tester
Thanks to our bidirectional topology, the All-Terrain AC/DC Converter is regenerative, resulting in a reduction of both the consumed energy during the tests and the power required from the electrical installation.
This technology allows us to work in both directions, as power generators or offering a consumption for the realization of all types of tests.