GE+ vAC/DC Full

Compare

Datasheet

Order

Compare

Datasheet

Order

GE+ vAC/DC Full

Regenerative AC/DC Grid Simulator

Discover GE+ vAC/DC Full

The GE+ vAC/DC Full is the most complete and flexible Voltage Source that allows full operations and power for AC and DC Test Platforms. Generation of Worldwide electrical grids, Generation of disturbances, harmonics generation and power amplifier are some of the key features of its Regenerative and Bidireccional power hardware. This product is an essential laboratory device for testing and R&D applications in Renewable Energy Sources (PV, WT, CHP), grid connected devices, Smartgrids, Batteries, Electrical Vehicles and Power HiL.

Order

Characteristics

Bidirectional and Regenerative

Parallelization of units to increase the power

Independent Phase Configuration of

voltage rms, phase angle, frequency and harmonics

Disturbance Generation Editor

compatible with IEC, LVRT, SEMI-F47, CBEMA test standards

Clean grid current

THDi <3% and PF > 0.98

Generation of Worldwide Electrical Grids

3-phase/ 1-phase/ split phase/ Multichannel

Generation of Disturbances

harmonics, interharmonics, subharmonics, voltage dips frequency variaton, flicker

Intuitive User Interface

Download datasheet

Applications

Our product line has been specially designed for functional testing, quality, R&D and academic applications. We will help you find the best solution for your project and customise when necessary.

Electromobility

We have thorough experience in providing solutions for Research and Development, Functional and End of Line tests in this field.

Smart Grids

Our range of products allow you to emulate the grid of the future and carry out tests on the different elements that will be part of it.

Academic & RCP

The origins of the Cinergia founding team were in a university research and development center, so we understand the specific needs of Academic and Research applications. In addition to our standard catalogue of products, we can adapt to fit your particular requirements.

Photovoltaic

Cinergia provides all necessary power devices for PV Inverter testing in a closed energy loop. In such a platform, the total power and energy consumption from the grid is reduced down to the losses of the power converters involved in the test, typically in the range of 20 to 35% of the power generated by the Inverter under test. In R&D, the main advantage is the reduction of power needed: a 100kW Inverter could be tested in a laboratory with 20 to 35kW installation. In burn-in and end-of-line testing, the savings in power means a significant reduction on the energy bill.

Industrial Test

Cinergia devices are carefully designed to be part of manual and automated test benches for functional and quality testing, as well as research and development of new products. Integrating our devices in test platforms is simple with the MODBUS/TCP protocol (other field buses are offered as an option), and the comprehensive documentation provided of the communication protocol. Labview drivers are supplied with each one of the equipment along with an open source Labview project that allows for a quick start.

Power HiL

We include the power amplifier functionality in some of our products that can be used in PHiL applications.

Energy Storage System

Cinergia has vast experience in this field and can provide a comprehensive test solution.

Safety first

The units integrate a local Emergency. Stop push button and two signals (input + output) to be connected to the laboratory interlock system. Additionally, the digital outputs can be interfaced to safety tower lights.

4.3” Touchscreens

Allows the local parameterization and command of the device, the configuration of the communications link, plots the main signals and enables the local data logging.

Emergency stop push button

Touchscreen panel

Friendly interface

The user interface used by CINERGIA devices has been developed by our R&D team, to offer total control of the device, with a comfortable and intuitive design. This allows us to take full advantage of the capabilities of the device, as well as the programming and execution of standardized or self-created tests.

Remote Control port

~ LAN Ethernet with Modbus/TCP protocol

~ Labview Drivers

~ RS485 (optional)

Digital IO port

~ 4 digital inputs

~ 3 relay outputs

~ 1 emergency stop

Optional analogue port

~ 6 analogue input 0-10V

~ 6 analogue output 0-10V

Discover more

Features and capabilities

AC Operation

Harmonics

Parallel Mode

Steps Mode

Disturbance Generation

IEC Testing

DC Operation

Sequence

Multichannel

Battery Pack Tester

Battery Emulation

PV Panel Emulation

Regenerative technology

Thanks to our bidirectional topology, all CINERGIA devices are regenerative, resulting in a reduction of both the consumed energy during the tests and the power required from the electrical installation.

This technology allows us to work in both directions, as power generators or offering a consumption for the realization of all types of tests.