EL+ vAC/DC Full

Compare

Datasheet

Order

Compare

Datasheet

Order

EL+ vAC/DC Full

Regenerative AC/DC Electronic Load

Discover EL+ vAC/DC Full

CINERGIA’s EL+ vAC/DC is the most versatile regenerative Current Source product in the market for energy testing in AC and DC applications. Its Bidirectional and Regenerative Hardware based on a back-to-back power conversion topology allows saving energy and power. Moreover, thanks to its flexibility, this device becomes crucial in two main areas: testing and R&D. The main applications for this device are Smart grids, Renewable Energy, Storage Systems, Electromobility, Avionics and Power HiL.

Order

Characteristics

Bidirectional and Regenerative

Parallelization of units to increase the power

Emulation of grid connected devices

Loads absorbing energy from grid

Generators injecting energy to the grid

Programmable Active/Reactive consumption

Non-linear currents up to CF of 3

13 Models

from 7.5kW to 160kW

Clean grid current

THDi <3% and PF > 0.98

Independent Phase Configuration of

rms current, phase angle, harmonics, interharmonics, generation of fast transients (“Current Dips”)

Modbus/Ethernet Open protocol, Labview drivers

Download datasheet

Applications

Our product line has been specially designed for functional testing, quality, R&D and academic applications. We will help you find the best solution for your project and customise when necessary.

Electromobility

We have thorough experience in providing solutions for Research and Development, Functional and End of Line tests in this field.

Smart Grids

Our range of products allow you to emulate the grid of the future and carry out tests on the different elements that will be part of it.

Aerospace

More electric and all-electric aircraft projects along with variable frequency generation systems are driving new developments and new test needs in the field of aerospace.

Photovoltaic

Cinergia provides all necessary power devices for PV Inverter testing in a closed energy loop. In such a platform, the total power and energy consumption from the grid is reduced down to the losses of the power converters involved in the test, typically in the range of 20 to 35% of the power generated by the Inverter under test. In R&D, the main advantage is the reduction of power needed: a 100kW Inverter could be tested in a laboratory with 20 to 35kW installation. In burn-in and end-of-line testing, the savings in power means a significant reduction on the energy bill.

Power HiL

We include the power amplifier functionality in some of our products that can be used in PHiL applications.

Safety first

The units integrate a local Emergency. Stop push button and two signals (input + output) to be connected to the laboratory interlock system. Additionally, the digital outputs can be interfaced to safety tower lights.

4.3” Touchscreens

Allows the local parameterization and command of the device, the configuration of the communications link, plots the main signals and enables the local data logging.

Emergency stop push button

Touchscreen panel

Friendly interface

The user interface used by CINERGIA devices has been developed by our R&D team, to offer total control of the device, with a comfortable and intuitive design. This allows us to take full advantage of the capabilities of the device, as well as the programming and execution of standardized or self-created tests.

Remote Control port

~ LAN Ethernet with Modbus/TCP protocol

~ Labview Drivers

~ RS485 (optional)

Digital IO port

~ 4 digital inputs

~ 3 relay outputs

~ 1 emergency stop

Optional analogue port

~ 6 analogue input 0-10V

~ 6 analogue output 0-10V

Discover more

Features and capabilities

AC Operation

Harmonics

Power and Impedance Control

Steps Mode

Disturbance Generation

Linear & Non-Linear Emulation

DC Operation

Sequence

Multichannel

Battery Pack Tester

Battery Emulation

PV Panel Emulation

Regenerative technology

Thanks to our bidirectional topology, all CINERGIA devices are regenerative, resulting in a reduction of both the consumed energy during the tests and the power required from the electrical installation.

This technology allows us to work in both directions, as power generators or offering a consumption for the realization of all types of tests.